Drum Sander

The drum sander is not a thickness planer! The drum sander is designed to remove very small amounts of material. NEVER remove more than 1/64" or a maximum of 1/32" of material in a single pass. If too much material is removed at one time the sanding belt on the drum will become clogged and the belt will be destroyed. Cleaning the belt is important. There are rubber cleaning sticks available to remove sanding remnants from the drum.

Laguna SuperMax 19-38 Drum Sander with Folding Infeed/Outfeed Tables & Wixey Digital Read Out

Specs

Dimensions (D x W x H): 27" x 46" x 52" (on stand) Drum: 5" x 19" extruded aluminum Drum Speed: 1,740 RPM Dust Hood: 1- 4″ vacuum port, min. 600 CFM recommended Conveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM Drive Motor (TEFC): 1-3/4hp Power Requirements: 110 V, 15 amp

Sanding Capacity

Max. Material Width: 38" (two passes) Min. Material Length: 2-1/4" Max. Material Thickness: 4" Min. Material Thickness: 1/32"