# Probotix CNC Router

![](/files/-LqltZRXH99QgmynQmS-)

<div align="left"><img src="/files/-LourdPWGrY246H4MoXs" alt=""></div>

## Useful Links

[Product Page](https://www.probotix.com/CNC-ROUTERS/CNC-ROUTER-GX3725)

[Getting Started Guide](https://drive.google.com/open?id=1w_1fAvfdo5E_BJbUVDhZ0cz-6_iwIFR7)

[Recommended Maintenance](https://www.probotix.com/wiki/index.php/Maintenance)

[RCL Router Training Videos on Youtube](https://www.youtube.com/playlist?list=PLcwu5-Mumv-a1A_1BLDorSAILYLmQ7sUR)

## Recommended Materials

* Wood
* Aluminum
* Plastics
* Foam

## Recommended Bits

### Wood

* [**Surfacing Planing Tool**](https://www.amazon.com/gp/product/B07BF5ZHD1/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8\&psc=1)

### Aluminum

#### Square End

* [1/16" Dia x 1/4" LOC x 1-1/2" OAL Carbide 2 Fl Uncoated Single End 30° Hlx Finishing SQ EM](https://www.fastenal.com/products/details/0321346)
* [1/8" Dia x 1/2" LOC x 1-1/2" OAL Carbide 2 Fl Uncoated Single End 30° Hlx Finishing SQ EM](https://www.fastenal.com/products/details/0321350)
* [1/4" Dia x 3/4" LOC x 2-1/2" OAL Carbide 2 Fl Uncoated Single End 30° Hlx Finishing SQ EM](https://www.fastenal.com/products/details/0321358)

#### Ball End

* [1/4" Dia x 1-1/8" LOC x 3" OAL Carbide 2 Fl Bright Finish 30° Hlx Finishing BN EM](https://www.fastenal.com/products/details/0321512)
* [1/2" Dia x 1" LOC x 3" OAL Carbide 2 Fl Bright Finish 30° Hlx Finishing BN EM](https://www.fastenal.com/products/details/0321474)

## Technical Specifications

|                    |                                                                        |
| ------------------ | ---------------------------------------------------------------------- |
| **Work Envelope**  |                                                                        |
| X Travel           | 37+ Inches                                                             |
| Y Travel           | 25+ Inches                                                             |
| Z Travel           | 5+ Inches                                                              |
| **Performance**    |                                                                        |
| Maximum Speed      | 200 Inches Per Minute (per axis), 330 Inches Per Minute (combined)     |
| Resolution         | 0.00125 Inches                                                         |
| **Mechanical**     |                                                                        |
| Drive Mechanism    | 1/2" 5-Start ACME Screws w/ Anti-backlash Nuts                         |
| Linear Rails       | 16mm Fully Supported Rails on X & Y Axis, 16mm Open Rail on Z Axis     |
| Machine Frame      | 3060M Aluminum T-slot Extrusion                                        |
| **Electrical**     |                                                                        |
| Control System     | Unity CNC Controller (5x 4.2Amp Bi-polar Drivers), LinuxCNC Control PC |
| Power Requirements | 10A\@110VAC for Control System, 20A\@220VAC for optional VFD Spindle   |

## 1.5KW VFD, Variable Frequency Drive (KL-VFD15), 110VAC input

**Product Description**

Led Display

Input: 110VAC ±15%  1 or 3 phase (R,S or R, T or S,T)    50/60Hz

Output: 110VAC 3 Phase (U,V,W)  1.5KW

Frequency Range: 0.1-400Hz

0-10V Analog interface capability

Variable speed potentiometer

**VFD Parameter set:**

PD000=1 for Parameter unlock ( 1 ) for Parameter Lock

PD001=1 (1 For Remote Control)

PD002=1 ( 1 For 0-10v Terminal Control or Remote Trim Pot Control ) ( J1 Also Needs to be set for Terminal Control )

PD003=400

PD004=400

PD005=400

PD007=20

PD008=120 (Motor Rated Voltage, If you have 120v spindle then set to 120v )

PD009=15

PD010=8

PD011=120 ( 100 Minimum Setting with Quality VFD, 120 is Safe)

PD13= 08 is for Factory reset, Only use this to set VFD to Factory Default Settings

PD014 Acceleration=12 ( Adjust to suit)

PD015 Deceleration=12 (Adjust to suit) ( PD15 is ignored IF PD26=1 Then the Spindle will Coast to a Stop)

PD141=120 ( Motor Rated Voltage ) (120 for VFD Rated for 120v )

PD142= 7\
PD142=( 220vSet for your motor Amp Rating 2.2Kw Spindle 9 amp )\
PD142=( 220VSet for your motor Amp Rating 1.5Kw Spindle 7 amp )\
PD142=( 220v Set for your motor Amps Rating 800w Spindle 4 amps )\
PD142=( 120v Set for your motor Amp Rating 800w Spindle 7 amp )

PD143=2 ( Motor Number of Poles)

PD144=3000 (Max Motor RPM) =3,000= (24,000)

PD70=0 ( This may need to be set to 1 if Control Voltage is 0-5v )

PD72=400

PD73=120 ( 100 Minimum Setting )

**Manuals & Downloads**\
[VFD User Manual (1708 downloads)](http://www.automationtechnologiesinc.com/download/17521/)\
Thanks to our customer.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.rivercitylabs.space/tools/woodshop/cnc/probotix-cnc-router.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.