> For the complete documentation index, see [llms.txt](https://wiki.rivercitylabs.space/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.rivercitylabs.space/tools/3d-printers/snapmaker-u1.md).

# Snapmaker U1

<div align="left"><figure><img src="/files/NB0kfCdZnaogEsjtedXa" alt="" width="323"><figcaption></figcaption></figure></div>

## Useful Links <a href="#useful-links" id="useful-links"></a>

## How to Print <a href="#how-to-print" id="how-to-print"></a>

Please refer to the [How to Print](https://app.gitbook.com/o/-LmtnbDJj_0DicA61Vpp/s/-LmtjMpkq7lmFcCnBcpE/~/changes/x3cB2oeEcfRTQ9ZS71Wl/3d-printers/how-to-print) guide for detailed instructions

## Slicer Setup <a href="#slicer-setup" id="slicer-setup"></a>

1. ![](/files/PuQP9BDVxqZApUq9mGdl)

## Technical Specs <a href="#technical-specs" id="technical-specs"></a>

* Build Volume: 270mm × 270mm × 270mm
* Toolheads : 4 (prints 4 different colors)
* Nozzle Diameter: 0.4mm
* Filament Diameter: 1.75mm
* Build Plate: Flexible Steel Sheet with PEI Surface
*

***